What Should I Pay Attention To When Using Digital Printing In Summer?
1.The best indoor temperature for printing machine operation is between 15-30 ℃. At a high temperature of 35 ℃, a fan or air conditioner is necessary to cool down. In addition, pay attention to check the heat dissipation condition of the printing machine, and take relevant reasonable measures to adjust in time if any abnormality is found.
2.Drying is always accompanied by high temperature. At this time, you need to pay attention to anti-static/anti-dry ink. Frequently sprinkle water on the ground to help prevent the indoor air from being too dry. At the same time, prevent static electricity from the grounding wire of the printing machine.
3.In a high temperature environment, don't connect too many devices to a socket. The printing machine and computer can be equipped with a socket, and the external dryer uses a single socket. Other electrical appliances, such as chargers/fans/air conditioners, etc. need to be equipped with a power socket. Do not mix a power socket with the printing machine.
4.The southern summer is not only hot, but also rainy. If the humidity is too high, it will affect the drying speed of the screen. In order to avoid the printing ink sticking together when the printing ink is not dry during the rewinding, it is recommended to use a cold fan for air drying.
5.When the summer is rainy, wet weather will affect the normal use of the printing machine. It is recommended to use a dehumidifier to dehumidify. At the same time, the main body of the printing machine should be covered well to prevent the damp air from invading the relevant circuit boards and components.
6.In order to ensure the stable and continuous operation of the printing machine in summer, we must strictly control the indoor temperature and humidity. It is best to place a thermometer and hygrometer indoors for real-time viewing and timely adjustment.
7.Pay attention to the daily dust-proof treatment to ensure that the production environment is relatively clean. If the air is filled with a large amount of particles or dust during the production process, it will affect the printing quality of the equipment.
In addition, when the temperature is too high, printing consumables will also be affected, especially ink. The temperature rises, the ink viscosity of the printing machine increases, and the ink fluency becomes poor, which will cause the printing effect to be greatly reduced. What's more, it will directly cause the ink to block the nozzle and affect the normal printing efficiency. Therefore, in summer, pay attention to the temperature and humidity of the ink storage environment. It is best to store it in a suitable environment according to the ink storage instructions.