3200DPI Sublimation Textile Printer
|Print Head||EPS 3200 / 4720||Print Head Quantity||3|
|Application||Transfer Paper||Print Width||1.9m|
|Ink||Sublimation Ink,water-baed Ink||Color||CMYK|
|Sublimation Printer Dimension||3070*1090*1610mm||Resolution||3200dpi|
|Take Up Unit||Tesnsion Take-up System||Warranty||1 Year|
3200DPI Sublimation Textile Printer,
AL193 Sublimation Textile Printer,
1.9m Sublimation Fabric Printing Machine
1.9m Fedar Sublimation Printer with three EPS 4720 printheads
EPS 4720 Printhead:
A. Printing width of EPS3200 head is 1.3 inches,about 30% wider than DX5, 3200 nozzles(400*8lines),which has
much higher speed and resolution than Dx5.
B. EPS3200 printhead adopts TFP technology,with the smallest droplet 2.5PL,variable dots technology,can
ensure perfect and high resolution printing performance.
C. Low replacement cost,each head is about 300-350USD,which helps client reduce cost to get more benefit!
Fedar AL 193 Triple-head Sublimation Fabric Printing Machine for transfer paper printing
|Printhead||Type||EPS3200 (Epson 4720 )|
|Nozzle Qty||800*4lines*3pcs printheads|
|Height to Platform||2-5mm|
|Printing Speed||Production Mode||2pass 120sqm/h|
|Average Mode||3pass 85sqm/h|
|High Resolution Mode||4pass 65sqm/h|
|Ink||Color||C M Y K|
|Max Printing Width||1900mm|
|Printing Media||Transfer Paper|
|Media Transfer Method||Dual-drive tension take-up system,Auto air shaft feeding system|
|Drying Method||External,Intelligent and air-heat Integrated drying system|
|Moisture Mode||Fully sealed auto moisturing and cleaning|
|RIP Software||Maintop6.0,Photoprint,Onyx,Wasatch and NeoStampa and etc.|
|Image Format||JPG,TIF,PDF,BMP and etc.|
|Computer||System||WIN7 64bit/WIN10 64bit|
|Hardware||Hard disk:500G (system disk more than 100G)
Memory:4G or more
CPU:Intel i5/i7 processor
|Transmit Port||Gigabit LAN|
|Work Environment||Temperature 20-35 centi degree; Humidity 35-65%|
|Power||Input Voltage||210-230VAC 50/60HZ 16A|
|Drying system||Max power 3500W|
1. New appearance with Hoson electronic boards installed making it a attractive and stable printer.
2. Platform adopts 8mm aluminimum alloy, which can reduce the shape variables during transportation.
3. New generation of high-speed print heads arranged in stagger mode with a resolution up to 3200 dpi
allows the high speed production at the speed of max. 120sqm/h.
4. Dual THK guide rails make carriage movement more smooth and provide longer lifespan of printer.
5. Variable dot technology, 3 sizes of dots can be generated for smoother gradation, vivid colors and sharp images.
6. Integrated feeding and take-up unit, max media loading is 1500m
1. Annual sales more than 1000sets, market feedback helps us optimize printers constantly.
2. Head replacement cost is far low comparing with Kyocera head, but printing quality is incomparable.
3. Thin transfer paper can be used to save paper cost. Support 25-80g/sm paper
4. Easy to install, operate and maintain, one operator can observe 10 printers at a time.
5. Big roll of paper can be loaded meanwhile guarantee a good take-up status.
6. Bulk tanks with 5L capacity to ensure the constinious ink supply.